در حال حاضر، TRIZ طراحی و تولید روتور و قطعاتPart Flow برای کمپرسورها و ماشین آلات گریز از مرکز، در صنایع شیمیایی ، نفت و گازرا،انجام میدهد.همچنین نوسازی، تعمیر و نگهداری تجهیزات دوار،قطعات وسیستمهای کنترل آنها صورت می گیرد .

روتورهای ساخت شرکت Triz بصورت موفقیت آمیزی برروی کمپرسورهای متعددی نصب شده و درسرویس قرارگرفته اند.مزایای استفاده ازآنها بشرح ذیل می‌باشد.
During design of the impellers the modern methods of blades profiling are used, providing the maximum output-input ratio;
At the stage of design engineering all the critical parts are subjected to strength analysis;
Application of high-quality corrosion-resisting steel for manufacture of impellers provides their stability in aggressive environment and increase the operational life of the assembly;
milling blades of impellers is performed at the advanced CNC five-axis machines, providing the processing of parts with complex space geometry, high accuracy of dimensions and quality of the surface;
The welding technology of impellers «through the slot» in the atmosphere of shielding gas allows performing high-strength corrosion resistant welding of weld-in connections, increasing overhaul period in comparison with riveted connections 7-10 times. The welding is performed by the qualified staff with corresponding tolerance and license application for the work performance;
The whole operation cycle of parts is performed at the one enterprise, providing the qualitative control of the part manufacturing;
The production center allows shaft processing, which length is up to 3800 mm. The maximum diameter of impellers is up to 860 mm.
فرایند بالانس روتور بدین صورت است که ابتدا قطعه های جزء،بصورت تکی بالانس میشوند.بالانس کلی دراتاق خلا وبصورت عملی تست میشود.
بعنوان مثال ،محصولات ما در پتروشیمی ها وکارخانجات ذیل استفاده می‌شود.
– Ammonia
-Carbamide
– Weakly Azotic Acid
– Methanol

خدمات مدرنیزاسیون بشرح ذیل است.

diagnostics and engineering;
proposals for improving the equipment operation;
gas dynamic analysis;
strength analysis;
development, manufacture and supply of spare parts and assemblies with improved technical features (including bearings, couplings, seals);
increase of compressor output-input ratio by flow channel optimization;
provision of the required margin of critical frequency;
change of the rotor stiffness;
technical measures in axial stability increase, calculation of the axial force;
projecting of the rotating equipment according to mounting dimensions;
manufacture of new compressor or repair of the existing one;
start-up and commissioning in the customer’s territory.

خدمات تعمیر بشرح ذیل است.